Eachine Racer 250 FPV Drone Review – Part 1 – [UnBox, Inspection, Setup]
In the first section of the video today, we will Eachine Racer 250 FPV Drone remove it from the box. In the second video we will fly the drone.
We face comes when we open the box the Eachine Racer’s instruction manual first. Then, we take out the battery and cables and battery charger. I didn’t expect the battery to come out, which it was beautiful. A very powerful battery; 1500 mAh and 11.1 V. strength. Out of the box to overcome a soft longitudinal of the remote control hanging. Then we will be removing four propellers into 2 sets in white and black colors. A great white for transmitter antenna turns, a lot of the necessary cable, an allen to tighten it, with a US adapter, and finally we get to the main body.
The section of the body, propeller’s part is plastic, main body is carbon fiber. We’re first antenna mounted to the body and squeezing. 2300 v. motor used in the propellers which is very good. Then, the receiver followed the cable to the body we’re sticking with 2 little antennas. We can put a soft sponge on the end of a stick battery then we slide the battery. This sponge, just in front of the battery, to avoid damage to the transmitter section is inserted. After installing the battery, open the remote and the drone, we’re checking whether it is running.
You came to place the propellers in addition. As the front and rear rotors have been properly monitored. And we’re ready to fly with Eachine Racer 250 FPV Drone.